323-845-9390

757-223-7522

Road Tube Accessories

End Plate Clamp

End Plate Clamp

End plate for center or side of road. Prevents sagging in the center of long road tubes. Heavy gauge steel with removable bridge for round, half round and Lo-Profile road tube. Two 1/4-20 bridge retaining screws and washers included. Stationary or removeable base plate with three anchoring holes for 1/4 inch shank masonry nails. Available for all size road tubes.

Blocking Clamp bridge designed to pinch and stop air flow through road tube (see p. 4). Available for all road tube sizes, designated as 1166-B, 1167-B, 1168.

Part # Description 1-25 26-49 50+
1166 Plate Clamp for Lo-Profile tube See TEP Price List
1167 Plate Clamp for round tube
1168 Plate Clamp for 1/2 round tube
End Plugs for road tube - Set Screw

End Plugs for road tube - Set Screw

Plug prevents introduction of dirt and moisture at end of tube and minimizes possibility of foreign matter being transmitted to counter. Screws into end of road tube with allen key (provided). Eliminates tire damage caused by nail or other type end plug coming loose in roadway. 5/16 inc OD x 3/4 inch length. Alloy steel, closed-end type.

Part # Description 1-49 50-99 100+
1165 End Plug & allen key See TEP Price List
End Plugs for road tube - Barbed

End Plugs for road tube - Barbed

Plug prevents introduction and moisture at end of tube and minimizes possibility of foreign matter being transmitted to counter. Presses into road tube for a secure, snug fit. 5/16 inch OD x 3/4 inch length. Brass, closed-end type.

Part # Description 1-49 50-99 100+
1163 End Plug - barbed See TEP Price List
Connectors & Clamps for Road Tube

Connectors & Clamps for Road Tube

Brass sleeve for splicing two pieces of road tube. Please specify for 1/4" or 3/16" inside diameter tubing.

For securing Tube Connect inside of tube. For 1/4 inch ID or 3/16 inch ID round road tube.

Part # Description 1-25 26-49 50+
1200 Tube Connect 1/4" ID See TEP Price List
1201 Tube Connect 3/16" ID
1202 Hose Clamp for Connector
Dual Size Tube Connector

Dual Size Tube Connector

This brass sleeve was specifically designed for splicing the 1/4" ID road tube with the Lo-Profile 3/16" ID road tube.

Part # Description 1-25 26-49 50+
1203 Dual Size Tube connector See TEP Price List
Chinese Fingerâ„¢

Chinese Fingerâ„¢

The Patented Trigg Industries Chinese Finger was designed to maintain tube tension at counter end or plugged end. Woven stainless steel grip with 3/16, 5/8 or 7/8 inch swaged loop to fit nail, road side spike or piton anchor. Grip fits end or center of tube. Will not slip or cut road tube or tires. Available for standard, 1/2 round of Lo-Profile road tube. Our best selling road tube grip for over 50 years.

Part # Description 1-99 100-499 500+
1145 3/16" Grip for Lo-Profile tube See TEP Price List
1150 5/8" Grip for round tube
1160 7/8" Grip for 1/2 round tube
C-Clamps

C-Clamps

Galvanized steel clamp for end of road tube. Anchors to road with two nails. Available for standard, Lo-Profile and metric size road tube.

Part # Description 1-99 100-499 500+
1171 for Lo-Profile road tube See TEP Price List
1172 for 10mm shank nails
1173 for 9/16" OD road tube
Figure 8

Figure 8

Woven stainless steel grip with 7/8 inch swaged loop to fit nail, roadside spike or piton anchor. Grip fits end or center of tube.

Part # Description 1-99 100-499 500+
1143 Figure 8 Grip See TEP Price List
PolyWeb Grip

PolyWeb Grip

Polypropylene webbing, 1 1/2 wide, 900 lb strength. To be cut in pieces, folded over road tube and nailed to pavement. Comes in black.

Part # Description Per Roll
1169 PolyWeb Grip, 100 yard roll See TEP Price List
Chains & Locks

Chains & Locks

For protecting traffic counters from theft.

Blue Chrome 3/16" welded chain, zinc plated. Sold in 7 foot lengths.

American solid brass padlock, 1 1/2" x 3".

Part # Description 1-35 36-72 73+
1900 Chain, 3/16" in 7 foot lengths See TEP Price List
6000 American Lock, 1 1/2" x 3"
Trigg Industries International Logo

West Coast
323-845-9390

East Coast
757-223-7522