757-223-7522

SE-IR/3311
SE-IR/3311

SE-IR/3311

Model #

SE-IR/3311

Description

Infrared over height vehicle detection system designed to detect overheight vehicles or oversized and alarm when an overheight vehicle passes. These over height detectors are for single direction roads and provide alarm upon any LED beam disruption.

Single Eye Infrared

Specifications

  • Input Power: 115 VAC, +/- 10%, 50/60 Hz. Other options include 24 VDC solar or 230 VAC, +/-10%, 50/60 Hz operation.
  • Output: Form C, dry relay contact closure, contacts rated 240 VAC 10A, protected by 8A circuit breaker.
  • Fault Reporting: Fault reporting output upon loss of power, source/detector failure or if beam is blocked for approximately 13 seconds. See Options and Accessories section.
  • Alarm Time: Adjustable by customer from 1 to 30 seconds. Custom alarm times available.
  • Electronics: Sensors are NEMA 6P enclosure rated. Electronic printed circuits for years of reliable operation.
  • Effect of Ambient Light: Very high noise immunity.
  • Minimum Range: 6 feet (2 m).
  • Maximum Range: 700 feet (213 m). Suggested maximum range 200 feet (61 m) to allow for bad weather and lens contamination.
  • Alignment: One LED and meter (GO-NOGO functions) provided for alignment. No special tools required.
  • Reaction Speed: 1 to 75 MPH (1 to 121 km/h) for a 2.5 inch (6.25 cm) diameter object 1 inch (2.5 cm) above the detection height. Custom speed/size available.
  • Counter: Records the number of activations.
  • Temperature Range: -40° to +135° F (-40° to +57° C).
  • Environmental Control: Internal thermostat controls air flow which reduces moisture and maintains internal temperature during cold weather.
  • Housings: External housing is heavy ALMAG casting and sheet aluminum (not less than 1/8 inch or .318 cm thickness) for rugged durability and extended life. Cabinet design minimizes effects of vandalism and provides rigid mounting. The pole cap serves as a mounting
  • Optional Fault Reporting (F): Fault reporting relay contact opening upon loss of power, source/detector failure or if beam is blocked for approximately 13 seconds. See Options and Accessories section.
  • Dimensions: Transmitter Cabinet: 15½ x 10 x 8¾ inches (39 x 25 x 22 cm). Receiver Cabinet: 15½ x 10 x 8¾ inches (39 x 25 x 22 cm).
  • Shipping Weight: 40 lbs (18 kg).

Panels

single-eye-115vac single-eye-src-115-230

Power Table

standard-120vac-power-table

Typical Sway

typical-sway-limit

Trigg LLC Logo

East Coast
757-223-7522